Getting The Best Swim Spa Cover

Swim Spas represent unique challenges when it pertains to covering them.
We can all concur that the swim spa has to be covered when not in use for all the same factors a hot tub needs a cover. The obstacle is that because of the length of the swim spa and the height of the sides, getting rid of and replacing the cover can be a lot harder.
Getting a new swim spa is an exciting occasion in life. You’re eagerly anticipating the exercise you’ll obtain from using it. Maybe you’re a little relieved to have actually lastly selected from the different models you looked at. At any rate, you probably weren’t thinking much about the cover you would use.
Typically, the cover that gets back with your brand-new purchase will be a 4 section stiff foam filled cover that will divide in the center and go off both ends.
No big deal.
Till it starts to get heavy.
Which it constantly does.
Every stiff foam filled Swim Spa Cover ever made ends up the same way and it is not the fault of the user. It’s a style defect. Integrated in obsolescence because as soon as it is put in use over the warm water in your swim spa it is unavoidable.
It’s not from rain, so having a taper won’t make any difference. In fact you could have it under a roof and the cover will still get heavy.
The reason is the steam from the water. The particles of steam are really small as they rise from the water surface. They make their way into the little fractures and crevices in the foam.

Then as the steam cools it forms back into a liquid and ends up being caught in the cover.
It occurs gradually and on a Swim Spa Cover which is made from individual sections, at varying speeds. So ultimately you’ll observe a couple of of the areas are actually getting heavy. The bar lifters on completions of the swim spa aren’t much assistance since you still need to raise that heavy cover back up onto the spa which is a lot higher than a regular spa.
This is why SpaCap.com created a different design for their Swim Spa Covers
Instead of using numerous foam panels to develop Swim Spa Covers that will eventually end up in some land fill, they developed one that uses air chambers that don’t suck up wetness.
In fact SpaCap.com Swim Spa Covers are lightweight, insulate much better, won’t blow away in a wind storm or be damaged by snow or hail.
Covered with Sunbrella Marine material, these covers will not fade, or fall apart at the joints either. So if you own a swim spa, and you mean to keep using it everyday, SpaCap.com has the cover for it.
If you’re not all set to purchase today, bookmark this website so you can discover it again when you’re prepared!

Leave a Reply

Your email address will not be published. Required fields are marked *