The Challenges to Swim Spa Covers

Swim Spas represent special obstacles when it concerns covering them.
We can all agree that the swim spa has to be covered when not in use for all the same factors a hot tub needs a cover. The difficulty is that because of the length of the swim spa and the height of the sides, eliminating and replacing the cover can be a lot harder.
Getting a new swim spa is an exciting event in life. You’re looking forward to the exercise you’ll obtain from using it. Possibly you’re a little relieved to have finally made a selection from the various designs you took a look at. At any rate, you most likely weren’t thinking much about the cover you would use.
Typically, the cover that gets home with your brand-new purchase will be a 4 section stiff foam filled cover that will split in the center and go off both ends.
No big deal.
Till it starts to get heavy.
Which it constantly does.
Every stiff foam filled Swim Spa Cover ever made winds up the same way and it is not the fault of the user. It’s a style defect. Integrated in obsolescence because as quickly as it is placed in use over the warm water in your swim spa it is unavoidable.
It’s not from rain, so having a taper won’t make any distinction. In fact you might have it under a roof and the cover will still get heavy.
The reason is the steam from the water. The particles of steam are extremely little as they increase from the water surface. They make their way into the little fractures and crevices in the foam. Then as the steam cools it forms back into a liquid and ends up being caught in the cover.
It takes place gradually and on a Swim Spa Cover which is made from private sections, at differing speeds. So eventually you’ll discover a couple of of the sections are really getting heavy. The bar lifters on completions of the swim spa aren’t much assistance since you still need to lift that heavy cover back up onto the spa which is a lot higher than a regular spa.
This is why SpaCap.com came up with a new style for their Swim Spa Covers
Instead of using a number of foam panels to build Swim Spa Covers that will eventually wind up in some garbage dump, they created one that utilizes air chambers that don’t suck up moisture.
In fact SpaCap.com Swim Spa Covers are light-weight, insulate better, will not blow away in a wind storm or be damaged by snow or hail.
Covered with Sunbrella Marine material, these covers won’t fade, or break down at the seams either. So if you own a swim spa, and you plan to keep using it everyday, SpaCap.com has the Swim Spa Cover for it.
If you’re not ready to order today, bookmark this site so you can find it once again when you’re ready!

Leave a Reply

Your email address will not be published. Required fields are marked *