The Challenges to Swim Spa Covers

Swim Spas represent unique obstacles when it comes to covering them.
We can all concur that the swim spa has to be covered when not in use for all the same factors a hot tub requires a cover. The difficulty is that because of the length of the swim spa and the height of the sides, eliminating and replacing the cover can be a lot harder.
Getting a new swim spa is an exciting event in life. You’re eagerly anticipating the exercise you’ll obtain from using it. Possibly you’re a little relieved to have actually finally selected from the various models you looked at. At any rate, you probably weren’t thinking much about the cover you would use.
Typically, the cover that gets home with your new purchase will be a four section rigid foam filled cover that will split in the center and go off both ends.
No big deal.
Until it starts to get heavy.
Which it constantly does.
Every rigid foam filled Swim Spa Cover ever made ends up the same way and it is not the fault of the user. It’s a style flaw. Integrated in obsolescence due to the fact that as quickly as it is placed in use over the warm water in your swim spa it is unavoidable.
It’s not from rain, so having a taper will not make any distinction. In fact you could have it under a roof and the cover will still get heavy.
The factor is the steam from the water. The particles of steam are really little as they rise from the water surface area. They make their way into the little fractures and crevices in the foam. Then as the steam cools it forms back into a liquid and ends up being trapped in the cover.
It happens gradually and on a Swim Spa Cover which is made from private areas, at differing speeds. So ultimately you’ll discover a couple of of the areas are truly getting heavy. The bar lifters on the ends of the swim spa aren’t much help since you still need to raise that heavy cover back up onto the spa which is a lot higher than a regular spa.
This is why SpaCap.com came up with a different style for their Swim Spa Covers
Instead of using a number of foam panels to develop Swim Spa Covers that will ultimately end up in some land fill, they designed one that utilizes air chambers that don’t suck up moisture.
In fact SpaCap.com Swim Spa Covers are light-weight, insulate better, won’t blow away in a wind storm or be harmed by snow or hail.
Covered with Sunbrella Marine material, these covers will not fade, or break down at the seams either. So if you own a swim spa, and you plan to keep using it daily, SpaCap.com has the Swim Spa Cover for it.
If you’re not all set to buy today, bookmark this website so you can find it again when you’re prepared!

Leave a Reply

Your email address will not be published. Required fields are marked *